Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 Command line: root=/dev/array/root md=2,/dev/sda3,/dev/sdb3,/dev/sdc3 md=0,/dev/sda1,/dev/sdb1,/dev/sdc1 rootfstype=ext4 ro KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfce0000 (usable) BIOS-e820: 00000000bfce0000 - 00000000bfde0000 (reserved) BIOS-e820: 00000000bfde0000 - 00000000bfde3000 (ACPI NVS) BIOS-e820: 00000000bfde3000 - 00000000bfdf0000 (ACPI data) BIOS-e820: 00000000bfdf0000 - 00000000bfe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.4 present. last_pfn = 0x140000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000BFE00000 mask FFFFFFE00000 uncachable 3 base 000100000000 mask FFFFC0000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbfce0 max_arch_pfn = 0x100000000 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bfce0000 (usable) modified: 00000000bfce0000 - 00000000bfde0000 (reserved) modified: 00000000bfde0000 - 00000000bfde3000 (ACPI NVS) modified: 00000000bfde3000 - 00000000bfdf0000 (ACPI data) modified: 00000000bfdf0000 - 00000000bfe00000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000140000000 (usable) init_memory_mapping: 0000000000000000-00000000bfce0000 Using GB pages for direct mapping 0000000000 - 0080000000 page 1G 0080000000 - 00bfc00000 page 2M 00bfc00000 - 00bfce0000 page 4k kernel direct mapping tables up to bfce0000 @ 8000-b000 init_memory_mapping: 0000000100000000-0000000140000000 Using GB pages for direct mapping 0100000000 - 0140000000 page 1G kernel direct mapping tables up to 140000000 @ a000-b000 RAMDISK: 37e8c000 - 37feffb5 ACPI: RSDP 00000000000f75e0 00014 (v00 GBT ) ACPI: RSDT 00000000bfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000bfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000bfde30c0 0729A (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000bfde0000 00040 ACPI: SSDT 00000000bfdea440 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000bfdead00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000bfdead40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 00000000bfdead80 0030A (v01 GBT GBT B0 5455312E BG 53450101) ACPI: APIC 00000000bfdea380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000082c0d0] TEXT DATA BSS ==> [0000200000 - 000082c0d0] #3 [0037e8c000 - 0037feffb5] RAMDISK ==> [0037e8c000 - 0037feffb5] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [000082d000 - 000082d106] BRK ==> [000082d000 - 000082d106] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f5bd0] f5bd0 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x000bfce0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1047674 DMA zone: 56 pages used for memmap DMA zone: 1681 pages reserved DMA zone: 2257 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767256 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000bfce0000 - 00000000bfde0000 PM: Registered nosave memory: 00000000bfde0000 - 00000000bfde3000 PM: Registered nosave memory: 00000000bfde3000 - 00000000bfdf0000 PM: Registered nosave memory: 00000000bfdf0000 - 00000000bfe00000 PM: Registered nosave memory: 00000000bfe00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: bfe00000:20200000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880028022000, static data 72352 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028073 Kernel command line: root=/dev/array/root md=2,/dev/sda3,/dev/sdb3,/dev/sdc3 md=0,/dev/sda1,/dev/sdb1,/dev/sdc1 rootfstype=ext4 ro Initializing CPU#0 NR_IRQS:768 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2611.306 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 1c2000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 4038020k/5242880k available (3409k kernel code, 1052184k absent, 151740k reserved, 1239k data, 460k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.21 BogoMIPS (lpj=8704340) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 00bfe00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 810 Processor stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5226.57 BogoMIPS (lpj=8706521) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Phenom(tm) II X4 810 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5226.58 BogoMIPS (lpj=8706534) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: AMD Phenom(tm) II X4 810 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5226.57 BogoMIPS (lpj=8706519) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: AMD Phenom(tm) II X4 810 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (20902.94 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-3 level MC groups: 0 1 2 3 CPU1 attaching sched-domain: domain 0: span 0-3 level MC groups: 1 2 3 0 CPU2 attaching sched-domain: domain 0: span 0-3 level MC groups: 2 3 0 1 CPU3 attaching sched-domain: domain 0: span 0-3 level MC groups: 3 0 1 2 net_namespace: 1888 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [a000, ffff] TOM: 00000000c0000000 aka 3072M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] TOM2: 0000000140000000 aka 5120M bus: [00,06] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [c0000000, dfffffff] bus: 00 index 3 mmio: [e0700000, ffffffff] bus: 00 index 4 mmio: [e0100000, e06fffff] bus: 00 index 5 mmio: [140000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:02:00.0: reg 10 io port: [0xbe00-0xbeff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdbff000-0xfdbfffff] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdbf8000-0xfdbfbfff] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:07.0: bridge io port: [0xb000-0xbfff] pci 0000:00:07.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] pci 0000:03:00.0: reg 10 io port: [0xee00-0xeeff] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] pci 0000:03:00.0: reg 20 64bit mmio: [0xfdff8000-0xfdffbfff] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:09.0: bridge io port: [0xe000-0xefff] pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] pci 0000:04:00.0: reg 24 32bit mmio: [0xfdefe000-0xfdefffff] pci 0000:04:00.0: PME# supported from D3hot pci 0000:04:00.0: PME# disabled pci 0000:04:00.1: reg 10 io port: [0xdf00-0xdf07] pci 0000:04:00.1: reg 14 io port: [0xde00-0xde03] pci 0000:04:00.1: reg 18 io port: [0xdd00-0xdd07] pci 0000:04:00.1: reg 1c io port: [0xdc00-0xdc03] pci 0000:04:00.1: reg 20 io port: [0xdb00-0xdb0f] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] pci 0000:05:06.0: supports D1 D2 pci 0000:05:0e.0: reg 10 32bit mmio: [0xfdaff000-0xfdaff7ff] pci 0000:05:0e.0: reg 14 32bit mmio: [0xfdaf8000-0xfdafbfff] pci 0000:05:0e.0: supports D1 D2 pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:0e.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xa000-0xafff] pci 0000:00:14.4: bridge 32bit mmio: [0xfd900000-0xfdafffff] pci 0000:00:14.4: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:06:08.0: reg 10 32bit mmio: [0xdc000000-0xdfffffff] pci 0000:06:09.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff] pci 0000:05:06.0: bridge io port: [0xa000-0xafff] pci 0000:05:06.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] pci 0000:05:06.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 3: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet: hpet2 irq 24 for MSI pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0a: mem resource (0xd4c00-0xd7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0a: mem resource (0x100000-0xbfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x220-0x225 has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:02: ioport range 0x4100-0x411f has been reserved system 00:02: ioport range 0x228-0x22f has been reserved system 00:02: ioport range 0x40b-0x40b has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:02: ioport range 0xc00-0xc01 has been reserved system 00:02: ioport range 0xc14-0xc14 has been reserved system 00:02: ioport range 0xc50-0xc52 has been reserved system 00:02: ioport range 0xc6c-0xc6d has been reserved system 00:02: ioport range 0xc6f-0xc6f has been reserved system 00:02: ioport range 0xcd0-0xcd1 has been reserved system 00:02: ioport range 0xcd2-0xcd3 has been reserved system 00:02: ioport range 0xcd4-0xcdf has been reserved system 00:02: ioport range 0x4000-0x40fe has been reserved system 00:02: ioport range 0x4210-0x4217 has been reserved system 00:02: ioport range 0xb00-0xb0f has been reserved system 00:02: ioport range 0xb10-0xb1f has been reserved system 00:02: ioport range 0xb20-0xb3f has been reserved system 00:09: iomem range 0xe0000000-0xefffffff has been reserved system 00:0a: iomem range 0xbfde0000-0xbfdfffff could not be reserved system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xc000-0xcfff pci 0000:00:02.0: MEM window: 0xfa000000-0xfcffffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:07.0: PCI bridge, secondary bus 0000:02 pci 0000:00:07.0: IO window: 0xb000-0xbfff pci 0000:00:07.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:07.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 pci 0000:00:09.0: IO window: 0xe000-0xefff pci 0000:00:09.0: MEM window: 0xfd800000-0xfd8fffff pci 0000:00:09.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0a.0: IO window: 0xd000-0xdfff pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:0a.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff pci 0000:05:06.0: PCI bridge, secondary bus 0000:06 pci 0000:05:06.0: IO window: 0xa000-0xafff pci 0000:05:06.0: MEM window: 0xfd900000-0xfd9fffff pci 0000:05:06.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 pci 0000:00:14.4: IO window: 0xa000-0xafff pci 0000:00:14.4: MEM window: 0xfd900000-0xfdafffff pci 0000:00:14.4: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] pci_bus 0000:03: resource 1 mem: [0xfd800000-0xfd8fffff] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] pci_bus 0000:04: resource 1 mem: [0xfde00000-0xfdefffff] pci_bus 0000:04: resource 2 pref mem [0xfdd00000-0xfddfffff] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] pci_bus 0000:05: resource 1 mem: [0xfd900000-0xfdafffff] pci_bus 0000:05: resource 2 pref mem [0xd8000000-0xdfffffff] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:06: resource 0 io: [0xa000-0xafff] pci_bus 0000:06: resource 1 mem: [0xfd900000-0xfd9fffff] pci_bus 0000:06: resource 2 pref mem [0xd8000000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 1423k freed Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1249146028.496:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7891 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:09.0: irq 27 for MSI/MSI-X pcieport-driver 0000:00:09.0: setting latency timer to 64 pcieport-driver 0000:00:0a.0: irq 28 for MSI/MSI-X pcieport-driver 0000:00:0a.0: setting latency timer to 64 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 PNP: PS/2 controller doesn't have KBD irq; using default 1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 460k freed SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:04:00.0: setting latency timer to 64 scsi6 : ahci scsi7 : ahci ata7: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 18 ata8: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 18 ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata3: softreset failed (device not ready) ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata1: softreset failed (device not ready) ata1: failed due to HW bug, retry pmp=0 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata3: failed due to HW bug, retry pmp=0 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: LITE-ON DVDRW SH-16A7S, WS04, max UDMA/100, ATAPI AN ata4.00: configured for UDMA/100 ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata2.00: configured for UDMA/133 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 scsi 3:0:0:0: CD-ROM LITE-ON DVDRW SH-16A7S WS04 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<5>sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<5>sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk sdc1 sdc2 sdc3 sd 2:0:0:0: [sdc] Attached SCSI disk md: raid1 personality registered for level 1 xor: automatically using best checksumming function: generic_sse generic_sse: 10296.000 MB/sec xor: using function: generic_sse (10296.000 MB/sec) async_tx: api initialized (async) raid6: int64x1 2300 MB/s raid6: int64x2 3133 MB/s raid6: int64x4 2410 MB/s raid6: int64x8 2182 MB/s raid6: sse2x1 3655 MB/s raid6: sse2x2 6009 MB/s raid6: sse2x4 7004 MB/s raid6: using algorithm sse2x4 (7004 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: bind md: bind md: bind raid5: device sdc3 operational as raid disk 2 raid5: device sdb3 operational as raid disk 1 raid5: device sda3 operational as raid disk 0 raid5: allocated 3220kB for md2 raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda3 disk 1, o:1, dev:sdb3 disk 2, o:1, dev:sdc3 md2: bitmap initialized from disk: read 15/15 pages, set 57 bits created bitmap (231 pages) for device md2 md2: unknown partition table md2: unknown partition table md: bind md: bind md: bind raid1: raid set md0 active with 3 out of 3 mirrors md0: bitmap initialized from disk: read 1/1 pages, set 1 bits created bitmap (7 pages) for device md0 md0: unknown partition table md0: unknown partition table device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EXT4-fs: barriers enabled kjournald2 starting: pid 724, dev dm-0:8, commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-0 with ordered data mode rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs udev: starting version 141 processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 processor ACPI_CPU:02: registered as cooling_device2 processor ACPI_CPU:03: registered as cooling_device3 powernow-k8: Found 1 AMD Phenom(tm) II X4 810 Processor processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2600 MHz) powernow-k8: 1 : pstate 1 (1900 MHz) powernow-k8: 2 : pstate 2 (1400 MHz) powernow-k8: 3 : pstate 3 (800 MHz) fuse init (API version 7.11) it87: Found IT8720F chip at 0x228, revision 5 it87: in3 is VCC (+5V) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 29 for MSI/MSI-X eth0: RTL8168d/8111d at 0xffffc200104a6000, 00:24:1d:15:85:89, XID 281000c0 IRQ 29 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:03:00.0: setting latency timer to 64 r8169 0000:03:00.0: irq 30 for MSI/MSI-X eth1: RTL8168d/8111d at 0xffffc2000005e000, 00:24:1d:15:85:99, XID 281000c0 IRQ 30 Uniform Multi-Platform E-IDE driver sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 3:0:0:0: Attached scsi generic sg3 type 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb jmicron 0000:04:00.1: IDE controller (0x197b:0x2363 rev 0x02) JMicron IDE 0000:04:00.1: enabling device (0000 -> 0001) JMicron IDE 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 jmicron 0000:04:00.1: 100% native mode on irq 19 JMicron IDE 0000:04:00.1: setting latency timer to 64 ide0: BM-DMA at 0xdb00-0xdb07 ide1: BM-DMA at 0xdb08-0xdb0f Probing IDE interface ide0... atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00) ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xfa00-0xfa07 atiixp 0000:00:14.1: simplex device: DMA disabled ide3: DMA disabled Probing IDE interface ide2... ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint ACPI: WMI: Mapper loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Probing IDE interface ide1... ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci1394 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdaff000-fdaff7ff] Max Packet=[2048] IR/IT contexts=[4/8] Probing IDE interface ide3... nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009 input: PS2++ Logitech Mouse as /devices/platform/i8042/serio1/input/input3 ide0 at 0xdf00-0xdf07,0xde02 on irq 19 ide1 at 0xdd00-0xdd07,0xdc02 on irq 19 ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 ide3 at 0x170-0x177,0x376 on irq 15 ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4 ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 usb 1-4: new high speed USB device using ehci_hcd and address 3 Linux video capture interface: v2.00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ivtv: Start initialization, version 1.4.1 ivtv0: Initializing card 0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv 0000:06:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: Hauppauge model 23559, rev E696, serial# 9954435 tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio ivtv0: Autodetected WinTV PVR 500 (unit #1) cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 3 ports detected tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tea5767 1-0060: type set to Philips TEA5767HN FM Radio tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: creating new instance tda9887 1-0043: tda988[5/6/7] found tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 1-0061: creating new instance tuner-simple 1-0061: type set to 73 (Samsung TCPG 6121P30A) IRQ 20/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs ivtv0: Registered device video0 for encoder MPG (16384 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card: WinTV PVR 500 (unit #1) ivtv1: Initializing card 1 ivtv1: Autodetected Hauppauge card (cx23416 based) ivtv 0000:06:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 2-0050: Hauppauge model 23559, rev E696, serial# 9954435 tveeprom 2-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Autodetected WinTV PVR 500 (unit #2) cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 2-0043: creating new instance tda9887 2-0043: tda988[5/6/7] found tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 73 (Samsung TCPG 6121P30A) IRQ 21/ivtv1: IRQF_DISABLED is not guaranteed on shared IRQs ivtv1: Registered device video1 for encoder MPG (16384 kB) ivtv1: Registered device video33 for encoder YUV (2048 kB) ivtv1: Registered device vbi1 for encoder VBI (1024 kB) ivtv1: Registered device video25 for encoder PCM (320 kB) ivtv1: Initialized card: WinTV PVR 500 (unit #2) ivtv: End initialization ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019fb390000241d] usb 2-3: new low speed USB device using ohci_hcd and address 2 md: md1 stopped. md: bind md: bind md: bind raid1: raid set md1 active with 3 out of 3 mirrors md1: bitmap initialized from disk: read 9/9 pages, set 0 bits created bitmap (129 pages) for device md1 usb 2-3: configuration #1 chosen from 1 choice md1: unknown partition table usb 1-4.2: new low speed USB device using ehci_hcd and address 4 usbcore: registered new interface driver hiddev usb 1-4.2: configuration #1 chosen from 1 choice usb 1-4.3: new full speed USB device using ehci_hcd and address 5 usb 1-4.3: configuration #1 chosen from 1 choice generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 350 FW:807.q8.I USB FW:q8] on usb-0000:00:12.0-3/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/1-4.2:1.0/input/input5 generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.2-4.2/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/1-4.2:1.1/input/input6 generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-4.2/input1 generic-usb 0003:056D:0002.0004: hiddev1,hidraw3: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:12.2-4.3/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver EXT4 FS on dm-0, internal journal on dm-0:8 EXT4-fs: barriers enabled kjournald2 starting: pid 4110, dev dm-2:8, commit interval 5 seconds EXT4 FS on dm-2, internal journal on dm-2:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-2 with ordered data mode EXT4-fs: barriers enabled kjournald2 starting: pid 4111, dev dm-1:8, commit interval 5 seconds EXT4 FS on dm-1, internal journal on dm-1:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-1 with ordered data mode Adding 4208952k swap on /dev/md1. Priority:-1 extents:1 across:4208952k ivtv 0000:06:08.0: firmware: requesting v4l-cx2341x-enc.fw ivtv 0000:06:09.0: firmware: requesting v4l-cx2341x-enc.fw ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 ivtv0: Encoder revision: 0x02060039 cx25840 2-0044: firmware: requesting v4l-cx25840.fw cx25840 1-0044: firmware: requesting v4l-cx25840.fw